Bespoke Oak door and frame set made to fit existing opening. All finished in Osmo UV protection oil light Oak.
Woodland steps
We supplied and fitted treated timber, handrails and aggregates to make steps down to a fuel tank for safety within a wooded area
Oak and stainless steel table and chair set
Beam grade oak machined and jointed to clients specification to fit on stainless steel legs they had designes and manufactured. all of the oak is finished with a tung oil to bring out the natural beauty of the wood.
Drainage Planters
Treated softwood supplied to northumbrian water in kit form for them to assemble on site. These planters have been fitted in schools to act as soak aways to try and prevent flash flooding
Wish Tree
We were asked by Durham Cathedral to help with their 2018 Christmas campaign to raise funds. We were given a brief with a few sketches to design and make a sustainable, reusable tree that people could hang wishes from. After a few proto types and meetings between ourselves and the cathedral we came up with the design pictured above.
Softwood gates
We manufactured a bespoke pair of gates and posts to fit the existing brickwork opening. the gates were fully finished in Teknos reed green and fitted.
Iroko door and frame set
Bespoke door and side light frame set manufactured to clients design, fully finished and fitted. The door was made in Iroko and finished in a clear external varnish, the frame is hardwood painted white.
Garage door
New made to measure garage door supplied fully finished complete with hardware.
Oak Staircase
Oak Kite winder staircases manufactured to plans for new build. supplied complete with Oak handrails, baserails, newel posts and spindles.
Rocking horse
Thanks to Arbor timber for the supply of the high quality grade Ash for the base and the birch Plywood for the horse. The horse and base was finished with 3 coats of Osmo clear satin oil-wax combination recommended by Arbor timber which brought out the grain to give a very high quality finish.
Oak under stairs
We were thrilled to be involved with this project, we refurbished the staircase in Oak and glass, painting the treads and risers to complement the stair carpet runner. The under stairs was made into a cupboard with a bespoke solid Oak and glass door and screen. The interior of this cupboard was fitted out with wine racking by others.
Trex Composite decking
Trex composite decking was used to construct a corner decking area finished off with bespoke made timber seating and planting areas. The planters were capped off with a contrasting trex composite decking piece.
Pond seating platform
Good quality decking and joisting was used to install a seating platform and seats an the edge of a pond. A base was made at the rear to house a timber building suplied by others.
Decking
A raised platform deck was installed to provide a seating area for the client outside their patio doors. Steps were constructed allowing access into the rest of the garden and the whole area was finished off with glass balustrading to give an open feel with views of the garden and surrounding area.
Sliding folding timber doors
A bespoke set of sliding folding doors were manufactured to fit an opening productd by the clients builder. the doors were constructed using 58mm thick Red grandis hardwood, finished in Teknos dark stain to match the other windows in the property, all finished off with good quality chrome hardware. Our fitting team installed the door and trimmed off the edges.
Garage doors
Agba Hardwood doors were manufactured to customers design to fit opening in garage. The timber was fully finished in light oak stain and installed by our fitting team.
Cedar Green house
Our client came to us wanting to make use of an area which was a old brick Pig sty. We manufactured and installed a Western red Cedar green house to fit the existing brickwork including all of the glazing.
Softwood CD rack
We manufactured a softwood shelving rack to customers design to be used within Durham Markets co on a stall selling CDs
Radiator Shelf
Our client came to us with a design for bespoke radiator shelves. These were manufactured by us in American whire Oak and finished in Osmo Polyx oil.
Oak Truss
Green Oak truss manufactured by hand using traditional methods.
Green oak construction
Using Traditional methods for making joints in Green Oak trusses and porches
Balcony Balustrade
Western Red Cedar Posts and handrail manufactured and installed to an existing flat roof area to form a balcony. Bespoke glass infill panels were fitted to the timber with stainless steel glass clamps providing an open airy feel.
Internal arched door
Bespoke door and frame set manufactured to fit an existing arched opening, fully finished in Osmo polyx oil and fitted by our own fitting team.
Oak sliding folding door set
supply and installation of a sliding folding external door set
Oak internal frame
Bespoke door and frame set manufactured, fully finished in Osmo polyx oil and installed by our fitting team. Our client had an open plan downstairs which was a little draughty, we designed and manufactured a bespoke frame complete with angled toplight to partition off the living room.
Arched door set
Arched bespoke door set made to fit an existing arched opening within a stone property. The arched door and sidelight sets were manufactured to template, fully finished white and installed by our fitting team.
Oak shoe rack
Oak shoe rack built to match customers original design, fully finished in Osmo Polyx oil.
Floating staircase
we were commissioned to manufacture timber sleeves and flooring to clad a metal floating staircase. Working alongside the metal fabrication company we made bespoke Utile hardwood tread cover boxes and Utile tongue and groove flooring for the landing platform. All of the Utile was then finished with Osmo Polyx Oil Tints in colour Terra to give a dark wood appearance.
Oak Shelves
European Green Oak beams jointed and cut to shape fitting the exising brickwork forming the mantel shelf and alcove shelves.
Oak Steps
Oak steps manufactured to fit under existing door
Pine Staircase
Bespoke Pine access staircase manufactured to match the original staircase of the commercial property.
Oak Entrance porch
New Posts and beams were fitted to an existing roof sructure relacing old softwood post which had gone rotten. European Green Oak was used throughout to give not only a very attractive look but also longevity.
Green European Oak
Arbor Timber supplied Green European Oak beams and cladding, delivered to site, for the customer to construct a traditional style garage building.