logo

Softwoods

Dressed Softwood

We carry large stocks of planed square edge joinery quality Redwood (Pine).  Average lengths available are 2.4 mtr – 4.8 mtr. Longer lengths are available subject to stock.

 Size mm  25 50 75 100 150 175 225
16              
19              
25              
32              
38              
50              
75              
100              














All sizes used are nominal size before machining. Actual finished size is approximately 4-5mm smaller (eg 25mm nominal finishes at 20mm)

Pine flooring

112 T & G

150 x 22mm Whitwood flooring T&G (138mm face cover x 18mm)
150 x 25mm Redwood flooring T&G (138mm cover x 20mm)


Cladding

TG & V1 side  TG & V2 side  Spooned Weatherboard TG
 
 T & G and V1 side  T & G and V2 side  Spooned Weatherboard T & G

100 x 12.5mm V jointed Knotty Pine (89mm face cover x 8mm fs)
100 x 19mm V jointed Redwood 89mm (89mm face cover x 15mm fs)
125 x 25mm V jointed 2 sides Redwood (112mm face cover x 20mm fs)
125 x 16mm T&G shiplap (112mm face cover x 12mm fs)
100 x 19mm Western Red Cedar (89mm face cover x 15mm fs)

Softwood Joist

We stock a large range of Graded C16/C24 regularised eased edge softwood joists in lengths from 2.4mtr – 4.8mtr. longer lengths available on request.

  2.4 mtr 3.0 mtr 3.6 mtr 4.2 mtr 4.8 mtr
  75 x 47 mm          
100 x 47 mm          
150 x 47 mm          
225 x 47 mm          
225 x 75 mm          

We also have a full machining service to cross cut to length or width.
All sizes used are nominal size before machining. Actual finished size is approximately 4-5mm smaller (eg 25mm nominal finishes at 20mm)


Treated softwood Joists

We carry large stocks Graded to C16 minimum and pre-treated with Osmose Naturewood softwood joists.

  3.0 mtr 3.6 mtr 4.8 mtr
100 x 47 mm      
100 x 47 mm      

All sizes used are nominal size before machining. Actual finished size is approximately 4-5mm smaller (eg 25mm nominal finishes at 20mm)

Slaters Lathes

We stock Treated and graded slaters lathes sizes as follows.
19mm x 38mm fs
25mm x 38mm fs
25mm x 50mm fs


CLS/Scant

We carry kiln dried CLS sizes as follows
75mm x 50mm x 2.4mtr (63mm fs x 38mm fs)
100mm x 50mm x 2.4mtr (89mm x 38mm fs)


Return to Products overview...